Estimate appliance wattage from volts, amps, and an optional power-factor assumption.
WeCovr's appliance wattage calculator estimates power in watts from voltage, current, and a simple power-factor assumption. It is useful for rough appliance sizing and energy-planning context.
The calculator multiplies voltage by current and adjusts by power factor to estimate real power in watts.
It also converts that result into kilowatts, which is the unit often used in energy and running-cost calculations.
Uses voltage, current, and power factor.
Returns estimated watts and kilowatts.
Useful for simple appliance and energy calculations.
Appliances do not always draw their rated current continuously, and startup surges, variable loads, and efficiency behaviour can all affect actual power draw.
Use the result as a rough electrical estimate, especially when pairing it with a running-cost or energy-use calculation.
| Measure | What it shows | Typical use | Limitation |
|---|---|---|---|
| Voltage | Electrical potential | Supply assumption | Not enough to estimate power alone |
| Current | Electrical flow | Rated or measured load | Can vary with load |
| Wattage | Estimated power draw | Energy and appliance planning | Still an estimate in this context |
Wattage is a measure of power, showing how quickly electrical energy is being used.
Because not all electrical loads convert voltage and current into real power at a perfect one-to-one relationship.
Not always. It is a rough estimate based on the assumptions entered.
Yes. The wattage estimate can be used as an input for running-cost planning.
Get your score
Get your free Protection Score
Check how protected you are, spot the biggest gaps, and then decide what to do next.
Answer a few quick questions
See where your biggest protection gaps may be
Move into the right next step if you want help
What you get
A quick view of your current protection position
A clearer idea of where the biggest gaps may be
A direct route to tailored help if you want it